LVL HUAI'AN SPRING WOOD INDUSTRY

LVL is made by laminating rotary-cut veneers in a parallel grain direction and bonding them under heat and pressure. Knot-free, stable and uniform in strength, it comes off the same line for structural and furniture use. Structural grades are produced under JAS certification in 30, 38 and 45 mm thicknesses and 3 m and 4 m lengths, up to 12 m. HARU PLYWOOD produces it in our own factory in Jiangsu, established ten years ago and supplying Japanese customers on an OEM basis from the start. In construction it forms sills, studs (30 × 105 mm), shear-wall bracing, lintels, floor beams and roof purlins; 12 m lengths remove site splicing. In furniture it is the hidden load-bearing part: bed slats, sofa and armchair seat and back frames, chair inner frames, table legs and stretchers, cabinet frames and drawer sides. Knot-free and defect-free, it holds hardware without working loose, cuts full length with little waste, and a veneer or melamine face makes it a finished product. Moisture content stays below 14%, so wall surfaces do not swell and nail heads do not pop.